27
• While lifting up the stacker rolls with your hand,
pull the levers (left and right) attached to the
stacker lever in the direction of the arrow, and
adjust so that the stacker rolls are above the belt.
ö
Set the folding mode to “Double fold”.
õ
Press the “test” button and test the folding.
Check if the paper is ejected smoothly.
ú
If the paper is not ejected smoothly, change the
position of the stacker rolls.
While pressing the “clear” button, press any
numerical key between “3” and “6” and adjust the
stacker rolls to the best position.
7. OPERATION PROCEDURES
Stacer lever
Belt
Stacer roller
Lever
To Next Page
Loading...
Need help?
General