28
ù
If there is folding slippage, adjust the stopping
position of the folding stopper with the adjusting
button of folding plate 1 or 2.
û
After completing all adjustments, press “special
folding” registration 1 or 2 and register this special
folding method.
Note : If a special folding method had been
registered before, registering the new
method will erase the previous
registration data.
ü
Press the numerical buttons and input and set the
number of sheets to be folded.
†
Press the “start/stop” button and begin folding
operations.
7. OPERATION PROCEDURES
To Next Page
Loading...