55
3 Next, set the single fold mode and
perform test folding.
• Make sure that the paper has been folded properly.
4 Press the keys on the keypad to input
the number of sheets to be folded,
and start single folding.
If the number of sheets to be folded is 520
sheets for example, press the keys on the
keypad to input this value.
5 Face the folded edge of the folded
paper as shown in the figure and load
it onto the paper feed table.
6 Press the “Clear” button to erase
previous values.
11. CROSS FOLDING
Paper
Paper set lever
To Next Page
Loading...
Need help?
General