2-8
12H-M12M0-0309-0
1-15. Folding Plate 1 Home Sensor
[Part No.: 062-10782 Part name: Photosensor]
Uses a photointerrupter. Located inside folding plate 1 to detect the home position of the folding stopper.
1-16. Folding Plate 2 Home Sensor
[Part No.: 062-10782 Part name: Photosensor]
Uses a photointerrupter. Located inside folding plate 2 to detect the home position of the folding stopper.
1-17. Main Motor
[Part No.: 12H-8101X Part name: DC motor]
DC +24 V power supply, output 60 W brushless DC motor. For driving the conveyance section.
1-18. Paper Feed Tray Up/Down Motor (DF-920 only)
[Part No.: 97J-8505X Part name: DC motor unit]
DC +24 V power supply geared motor. For driving the level bar which raises/lowers the paper feed tray.
1-19. Folding Plate 1 Motor
[Part No.: 12H-8111X Part name: DC motor unit]
DC +24 V power supply DC motor. Located inside folding plate 1 for driving the folding stopper.
1-20. Folding Plate 2 Motor
[Part No.: 12H-8111X Part name: DC motor unit]
DC +24 V power supply DC motor. Located inside folding plate 2 for driving the folding stopper.
1-21. Stacker Roller Moving Motor
[Part No.: 96V-8146X Part name: DC motor]
DC +24 V power supply geared motor. Located inside the paper ejection section. For driving the arm for moving the
stacker roller.
1-22. Stacker Roller Home Sensor
[Part No.: 98R-8023X Part name: Photosensor]
Uses a photointerrupter. Located inside the non-operating side frame. For detecting the home position of the stacker
roller.
1-23. Paper Feed Clutch
[Part No.: 12H-8120X Part name: Paper feed clutch unit]
Uses a DC +24 V electromagnetic clutch (250 mA, coil resistance 96Ω). Located inside the non-operating side frame.
Drives for 130 msec (about one rotation) when paper feed is started and feeds paper to the folding roller.
To Next Page
Loading...
Need help?
General
