DURAG D-R 290 User Manual

List of figures
D-R 290
7
Fig. 5.3 Installation example on a horizontal duct.....................................................................................
69
Fig. 5.4 Standard welded-in pipe with adjustment flange..........................................................................
71
Fig. 5.5 Standard installation of a welded-in pipe with adjustment flange.................................................
72
Fig. 5.6 Installation of a welded-in pipe with adjustment flange in a brick stack.......................................
73
Fig. 5.7 Installation of a welded-in pipe with adjustment flange on a gusset plate....................................
74
Fig. 5.8 Installation of a welded-in pipe with adjustment flange in a double-walled flue...........................
75
Fig. 5.9 Alignment of the tube stubs..........................................................................................................
76
Fig. 5.10 Installation at the adjustment flange, dimensional diagram D−R 290..........................................
78
Fig. 5.11 Adjustable attachment..................................................................................................................
79
Fig. 5.12 Connection plugs and sockets on the underside of the housing..................................................
80
Fig. 5.13 (LEDs in the measuring head)......................................................................................................
81
Fig. 5.14 Attachment screws for thehousing cover.....................................................................................
82
Fig. 5.15 Undo.............................................................................................................................................
82
Fig. 5.16 Position of the switches SW1 and 2 in the measuring head........................................................
82
Fig. 5.17 Tightening.....................................................................................................................................
83
Fig. 5.18 Installation at the adjustment flange, dimensional diagram D−R 290..........................................
85
Fig. 5.19 Adjustable attachment..................................................................................................................
86
Fig. 5.20 Control electronics displays..........................................................................................................
87
Fig. 5.21 Air flow sensor..............................................................................................................................
88
Fig. 5.22 Electrical connection to the D-SK AE...........................................................................................
89
Fig. 5.23 Connection of the fail-safe shutter to the 8-core plug cable of the measuring head....................
91
Fig. 5.24 Control electronics front panel......................................................................................................
93
Fig. 5.25 LED control electronics................................................................................................................
94
Fig. 5.26 D‑SK AE control electronics.........................................................................................................
95
Fig. 5.27 Shutter motor
................................................................................................................................
95
Fig. 5.28 Connecting the D−R 290 as an individual sensor to the D‑TB 100 supply unit............................
96
Fig. 5.29 Connecting the D−R 290 as an individual sensor directly to the D‑ISC 100 control unit..............
96
Fig. 5.30 Supplying the D−R 290 via a D-TB 100 and connection of a D‑ISC 100 via DURAG Bus..........
97
Fig. 5.31 Supply unit cover assembly..........................................................................................................
98
Fig. 5.32 Attaching the retaining plates.......................................................................................................
98
Fig. 5.33 Connecting the cable screen........................................................................................................
99
Fig. 5.34 Connecting the cable....................................................................................................................
100
Fig. 5.35 D-TB 100 terminal box connection diagram.................................................................................
100
Fig. 5.36 Junction box.................................................................................................................................
102
Fig. 5.37 Electrical connection for the purge air motor................................................................................
102
Fig. 6.1 Sighting mechanism.....................................................................................................................
108
Fig. 6.2 Optical alignment..........................................................................................................................
108
Fig. 6.3 Device list.....................................................................................................................................
109
Fig. 6.4 PIN lock deactivated.....................................................................................................................
111
Fig. 6.5 Login box......................................................................................................................................
112
Fig. 6.6 D-ESI 100 device overview page after login................................................................................
113
Fig. 6.7 D-ESI 100 device overview page after login................................................................................
113
Fig. 6.8 Change PIN Code box.................................................................................................................
114
Fig. 6.9 End device locked with a PIN code..............................................................................................
114
Fig. 6.10 Deactivate the PIN code...............................................................................................................
115
Fig. 6.11 PIN Code changed successfully...................................................................................................
115
Fig. 6.12 PIN lock deactivated.....................................................................................................................
116
Fig. 6.13 Change PIN code failed...............................................................................................................
116
Fig. 7.1 Info about D−ESI 100
...................................................................................................................
119
Fig. 7.2 Setting the date/time
....................................................................................................................
120

DURAG D-R 290 Specifications

General

Brand	DURAG
Model	D-R 290
Category	Monitor
Language	English