DuraLabel Bronco - 9. Specifications

22 | 9. Specications GraphicProducts.com | 800.788.5572
9. Specications
PRINTER
• Type: Thermal Transfer
• Print Speed: up to 3" per second (76.2 mm/s)
• Resolution: 300 dots/inch (12 dots/mm)
• Max. Print Width: 4.16" (105.7 mm)
• Max. Print Length: 30" (762 mm)
• Agency Approvals: CE , FCC Class A, IC
INDICATORS & BUTTONS
• Indicators: x1 tri-color LED: Power (green, orange, and red)
• Buttons: Feed
COMMUNICATION AND DATA STORAGE
• Communication(s): USB 2.0
• Data Storage: 4 GB Flash, 8MB SDRAM
POWER REQUIREMENTS
• Input Voltage: 24 VDC, 2.5A
• Different AC adapters available for worldwide usage
ENVIRONMENT
• Operating Temperature: 41°F to 104°F (5°C to 40°C)
• Operation Humidity: 30% - 85%, non-condensing
• Storage Temperature: -4°F to 122°F (-20°C to 50°C)
• Storage Humidity: 10% - 90%, non-condensing
LABEL STOCK
• Type: Continuous, Black Mark & Die-Cut
• Width: 0.25" (6.35 mm) minimum - with separate tape guide,
4.64" (118 mm) maximum
• Max Label Roll Diameter: 4.44" (113 mm)
• Core Diameter: 1" (25.4 mm)
RIBBON SUPPLY
• Premium Resin
• Max. Width: 4.33" (110 mm)
• Capacity: 360' (110 m) with 0.5" (12.7 mm) core diameter
• Max. Ribbon Roll Diameter: 1.57" (40 mm)
• Core Diameter: 0.5" (12.7 mm) with notch
PRINTER BODY
• Dimensions: 9.2"(W) x 11.8"(D) x 6.3"(H)
• Weight: 6.7 lbs (3.04 kg), excluding supplies