Duratech TC-12 - Introduction; Purpose

2
TC-12 TREE CHIPPER OPERATING INSTRUCTIONS
Introduction
This TC-12 TREE CHIPPER is designed to chip trees and shrubs 12” diameter or less.
Purpose
Purpose of this owner’s manual is to explain maintenance requirements, safety and routine adjustments for most ef-
cient operation of your TC-12 TREE CHIPPER. There is also a trouble shooting section that may help in case of prob-
lems in the eld. Any information not covered in this manual may be obtained from your dealer.
SPECIAL NOTE: When reference is made as to front, rear, left hand or right hand of this machine,
the reference is always made from standing at the rear of the machine and looking toward the hitch.
Always use serial number and model number when referring to parts or problems. Please obtain your
serial number and write it below for your future reference.
MODEL: _____________________ SERIAL NUMBER: _______________________