Duratech TC-12 - Transporting the TC-12 TREE CHIPPER; Section 4: Engine Maintenance

26
TC-12 TREE CHIPPER OPERATING INSTRUCTIONS
3.15 Transporting the TC-12 TREE CHIPPER
1. Make sure towing vehicle hitch is properly equipped for the hitch of the TC-12 TREE CHIPPER.
2. Properly attach the chipper to the towing vehicle and install safety pins. Securely attach safety chains to
the towing vehicle.
3. Check tire pressure and wheel rims for fatigue or loose bolts.
4. Hook up electrical connections and make sure all taillights and turn signals function properly.
5. Raise tongue jack to transport position.
6. Clean infeed of all debris.
7. Point discharge chute toward the hitch for transport.
8. Remove wheel blocks and check machine for any loose items that might get lost during transport.
Section 4: Engine Maintenance
Engine oil level, engine coolant level, air lters, and fan belt tension should be checked daily. All debris and combus-
tible or ignitable material should be cleared from the engine compartment daily or more often as conditions warrant.
When cleaning the engine compartment, pay particular attention to the top of the engine. Follow the engine manufac-
turer’s recommendations for the replacement of parts and uids, and follow the manufacturer’s recommended mainte-
nance schedule. Engine specications should be found in the Operation and Maintenance manual for the engine.