36
3.4 Water supply
Supply the SensoWash
®
D-Code with cold water from the main water supply. Do not
use process water or waste water as the water supply, because this can lead to skin
damage, diseases or other health problems.
Only fit the product with the newly delivered water supply hoses, the old water supply
hoses should not reused.
Follow the local ordinance for preventing the back-flow of water and use a suitable
water back-flow preventer for the water connection of the product.
3.5 Faults / Maintenance / Notes
Avoid malfunctions and damage to the product as a result of improper use!
• Close the stopcock of the main water supply when you clean the fine filter. (see
9.2)
• Do not use excessive force on the buttons of the control panel and seat unit.
• Do not climb on or stand on the product, and do not place any heavy objects on the
lid.
• Do not push the lid down with excessive force.
• The spray wand should not be deliberately soiled, sprayed on or clogged up.
• No subsequent modifications, tampering, installation of additional equipment or
repair attempts are permitted on the SensoWash
®
D-Code.
• Improperly performed repairs can lead to accidents, damage and malfunctions.
• SensoWash
®
D-Code is equipped with a seat sensor and is fully functional as soon
as a user is sitting on the seat. Please take this into account during use, cleaning
and installation!
To Next Page
Loading...
Need help?
General
