To Next Page

To Previous Page

7. 3 Ladywash

> Press the "Ladywash" button <

> on the control panel.

The spray wand moves out and sprays a water jet for about one minute. This func-

tion is then stopped automatically.

> Press the "Stop" button <

> on the control panel.

All of the functions that are currently active will be terminated.

After the cleaning, the spray wand is cleaned automatically for about three

seconds. The spray wand retracts during this time and is flushed all-round with water.

If the "Ladywash" button is pressed <

> once again during the cleaning process,

cleaning continues for another minute.

During the cleaning process the water temperature and water pressure (see 8.5 -

8.8) can be adjusted to suit the user’s personal preferences.

If the seat sensor does not detect any user on the seat, then the SensoWash

D-Code

will not function.

7. 4 Comfortwash

> Press the "Comfortwash" button <

> on the control panel during the Rearwash

or Ladywash function. The oscillation function is activated.

During this function, the spray wand carries out forward and backward movements

automatically.

> Press the "Stop" button <

> on the control panel.

All of the functions that are currently active will be terminated.

If the seat sensor does not detect any user on the seat, then the SensoWash

D-

Code will not function..

DURAVIT Sensowash D-Code User Manual

Questions and Answers: