DURAVIT Sensowash D-Code User Manual

40
7. Operation
7. 1 Configuration
Activating / deactivating the mute function
> Press and hold the "Stop" <
5
> and "Rearwash" <
4
> buttons on the control
panel simultaneously for 3 second to enter one of the special modes. The three
LEDs of the "Water pressure" button and the LED of the "Water temperature / seat
temperature" button flash.
> Press the "Stop" button <
5
> on the control panel to activate / deactivate the
mute mode. An audible signal sounds when the mute mode is deactivated. Two
audible signals sound when the mute mode is activated.
The setting is completed after 10 seconds.
Activating / deactivating the power-saving mode
> Press and hold the "Stop" <
5
> and "Rearwash" <
4
> buttons on the control
panel simultaneously for 3 second to enter one of the special modes. The three
LEDs of the "Water pressure" button and the LED of the "Water temperature / seat
temperature" button flash.
> Press the "Rearwash" button <
4
> on the control panel to activate / deactivate
the power-saving mode. An audible signal sounds when the power-saving mode is
deactivated. Two audible signals sound when the power-saving
mode is activated.
The setting is completed after 10 seconds.

DURAVIT Sensowash D-Code Specifications

General

Brand	DURAVIT
Model	Sensowash D-Code
Category	Plumbing Product
Language	English