EasyManua.ls Logo

DURAVIT Sensowash D-Code - Page 50

DURAVIT Sensowash D-Code
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
Problem Potential cause Solution see
sec.
Water comes
out in locations
other than the
spray wand.
Rubber seal not in-
serted.
> Place the rubber seal between
the T-shaped connecting pipe
and the water cut-off valve.
> Tighten the threaded nut.
7
Supply hose not con-
nected correctly.
> Check whether the supply
hose is connected correctly.
> If necessary, connect the sup-
ply hose correctly
Fine filter blocked by
foreign bodies.
> Check whether the fine filter
is blocked by foreign matter.
> Clean the fine filter and re-
install it.
9.1
Fine filter damaged.
> Remove the fine filter and
check whether it is damaged.
> Order a new fine filter.
> Have our Customer Service
install a new fine filter.
9.1

Table of Contents

Related product manuals