To Next Page
E
Eddie RodriguezSep 1, 2025
Why is the water spray intensity not stable on DURAVIT Toilets?
- Eeric31Sep 1, 2025
If the water spray intensity on your DURAVIT toilet isn't stable, the water filter might be clogged. Try cleaning the water filter.
Why is the water spray intensity not stable on DURAVIT Toilets?
If the water spray intensity on your DURAVIT toilet isn't stable, the water filter might be clogged. Try cleaning the water filter.
What to do if DURAVIT SensoWash i Plus Toilets remote control does not work?
If the remote control for your DURAVIT Toilet isn't working, begin by inserting batteries. If that doesn't solve the issue, the remote control may be defective, and further assistance may be needed.
Why does my DURAVIT SensoWash i Plus Toilets remote control not work?
If the remote control for your DURAVIT toilet isn't working, start by checking if batteries are inserted. If not, insert them. If the remote still doesn't work after inserting batteries, further assistance may be required.
Why water spray from the spray wand suddenly stops in DURAVIT SensoWash i Plus Toilets?
If the water spray from the spray wand of your DURAVIT Toilet suddenly stops, it could be due to the function stopping automatically after 2 minutes, which is normal. Alternatively, the seat sensor might have lost contact, so sit down and select the function again.
What to do if DURAVIT Toilets has water leakage?
If you notice water leakage from your DURAVIT Toilet, it indicates a malfunction. Immediately close the main valve for the water supply and disconnect the power supply. Further assistance may be needed.
Why white LED blinks when RC is in use on DURAVIT SensoWash i Plus?
If the white LED blinks for 3 seconds when the remote control is in use with your DURAVIT Toilet, it indicates that the batteries are low. Replace the batteries to resolve this issue.
How to fix water spray intensity if it is too weak in DURAVIT SensoWash i Plus Toilets?
If the water spray intensity of your DURAVIT Toilet is too weak, it might be set to low, so try adjusting it to medium or high. If the issue persists, it could indicate a water supply defect, and further assistance may be needed.
Why auto flush does not work on my DURAVIT SensoWash i Plus Toilets?
If the DURAVIT Toilet auto flush does not work, ensure that the auto flush is activated. The seat sensor might also be dirty or wet, so clean the surface. Note that auto flush only works when someone is seated and has been sitting for more than 6 seconds.
What to do if my DURAVIT Toilet does not flush?
If the DURAVIT Toilet does not flush, it might be due to a short interval between flushes, which is normal as the water takes approximately 25 seconds to refill. Alternatively, the stop valve might be closed, so ensure it is open. In case of a power or water supply failure, pour a bucket of water (8l) into the toilet, adding more if the water level is too low. If the problem persists, further assistance may be needed.
Why is the auto flush not working on my DURAVIT SensoWash i Plus Toilets?
If the auto flush on your DURAVIT toilet isn't working, first check if auto flush is deactivated and activate it. Also, if the seat sensor is dirty or wet, clean the surface. Auto flush only works when the user is seated and has been sitting for more than 6 seconds, so ensure that these conditions are met.
Details and identification of the main toilet unit parts.
Information on the remote control unit and SensoWash app functionality.
Locating and identifying key functional areas and product sides.
Explanation of symbols used in the manual for guidance and warnings.
Essential safety instructions for user and product protection.
Guidance on using the manual, product operation, and LED indicators.
Steps for activating the unit, app setup, and remote battery replacement.
Lid operation, flush modes, and cleansing functions.
Setting spray wand, water, dryer, odor extraction, and user profiles.
Instructions for daily and general cleaning of the unit.
Care for spray wand, strainer, holiday mode, filter, and descaling.
Proper disposal methods for the product and batteries.
Solutions for problems related to LEDs, unit, remote, and functions.
Key technical data, including power, dimensions, and consumption.
General