DURAVIT SensoWash i - Shower Function Usage

46
The „Detection distance“ icon glances.
> Press the „Increase function“ button
12
or the „Decrease function“ button
13
on
the remote control to set the suitable detection distance.
7.3 Shower functions
Activating / deactivating „Rearwash“
> Press the „Rearwash“ button
20
on the remote control.
The spray wand extends and sprays a jet of water.
> Press the „Stop“ button
9
on the remote control.
The spray wand retracts and the current function stops immediately.
Alternatively:
> Press the „Rearwash“ button
G
on the seat unit.
The spray wand extends and sprays a jet of water.
> Press the „Rearwash“ button
G
on the seat unit again.
The spray wand retracts and the current function stops immediately.
Activating / deactivating „Ladywash“
> Press the „Ladywash“ button
18
on the remote control.
The spray wand extends and sprays a jet of water.
> Press the „Stop“ button
9
on the remote control.
The spray wand retracts again and the current function stops immediately.
Alternatively:
> Press the „Ladywash“ button
F
on the seat unit.
The spray wand extends and sprays a jet of water.
> Press the „Ladywash“ button
F
on the seat unit again.
The spray wand retracts and the current function stops immediately.
Activating / deactivating „Comfortwash“
Requirement: Rearwash or Ladywash function is activated.
> Press the „Comfortwash“ button
19
on the remote control.
The oscillation function starts, the spray wand extends and retracts.
> Press the „Comfortwash“ button
19
on the remote control for a second time.
The pulsing function starts, the spray intensity increases and decreases.
> Press the „Comfortwash“ button
19
on the remote control for a third time.
The oscillation and pulsing functions are activated simultaneous.
EN