DURAVIT SensoWash i - Adjusting the Spray Wand Position; Adjusting the Water Spray Intensity; Adjusting the Water Temperature

47
> Press the „Comfortwash“ button
19
on the remote control for a fourth time.
The functions are now deactivated, the function (Rearwash or Ladywash) that was
previously set is still active.
Adjusting the spray wand position
The spray wand position can be set individually to 5 different positions:
Rear
< >
Front
> Press the „Spray wand position“ button
16
on the remote control.
The indicator light of the remote control illuminates.
You can now use the arrow buttons to set the suitable spray wand position.
Adjusting the water spray intensity
The water spray intensity can be set individually in 3 steps:
> >
Low Medium High
> Press the „Water spray intensity“ button
15
on the remote control.
The indicator light of the remote control illuminates.
> Press the „Increase function“ button
12
or „Decrease function“ button
13
on the
remote control.
You can now set a suitable water spray intensity.
Adjusting the water temperature
The water temperature can be individually adjusted in 4 levels:
> > >
Off Low Medium High
EN