DURAVIT SensoWash i - Manual Cleaning of the Spray Wand and Nozzle; Self-Cleaning of the Spray Wand

53
> Wipe slightly damp afterwards.
> Leave the toilet seat up while the toilet contains powerful cleaning agent.
Manual cleaning of the spray wand and nozzle
Manual cleaning is only possible if the seat sensor is not activated.
Clean the spray wand and nozzle regularly, or immediately if they are soiled.
> Press the „Stop“ button
9
and hold this pressed.
> Now press the „Rearwash“ button
20
on the remote control.
The spray wand extends.
> Clean the spray wand and nozzle with a soft cloth, soft sponge or a small brush and
mild cleaning agent.
> Press the „Stop“ button
9
again.
The spray wand retracts.
Alternative:
> Press the „Rearwash“ button
G
on the seat unit.
The spray wand extends.
To clean the spray wand, use a soft cloth, soft sponge or a small brush and a mild
cleaning agent.
> Press the „Rearwash“ button
G
on the seat unit again.
The current function stops immediately.
The spray wand retracts automatically after 3 minutes or when the seat sensor is
activated.
Self-cleaning of the spray wand
Clean the spray wand regularly, or immediately if it is soiled.
> Press the „Stop“ button
9
and hold this pressed.
> Now press the „Comfortwash“ button
19
on the remote control.
The spray wand cleans itself.
The spray wand is flushed with water in the concealed position.
> Press the „Stop“ button
9
again.
The current function stops immediately.
Alternative:
> Press the „Ladywash“ button
F
on the seat unit.
The spray wand cleans itself.
The spray wand is flushed with water in the concealed position.
> Press the „Ladywash“ button
F
on the seat unit again.
EN