3.3 Sewing equipment special
Machine with edge trimming
When changing a sewing category, it is also necessary to replace a throat plate insert (it can be bought
additionally). At the same time, when the insert is replaced, the edge width of the trimmed material is
changed too, so it is necessary to change the lateral setting of the trimming knife (Service manual, section
8.4).
Sewing category 3
Trimming distance/mm 2,0 2,4 3,0
Maximum stitch length 5
Maximum sewing speed 2000
Maximum lifting of standard knife 2,4
Throat plate 0888 201240
Throat plate insert S080 811809 S080 811803 S080 811805
Upper knife S080 870235 (S080 870238, S080 870239)
It is possible that it will be necessary to limit the sewing speed (or machine speed) when trimming,
dependent on the set stitch length and material to be trimmed, to be able to achieve the required sewing
quality.
11
EN
To Next Page
Loading...
