EN
Contents Page
Part 2: Assembly Instructions Class 888 - Original Instructions
1 Scope of delivery ............................................. 3
2 Transport packing of assembled machine ............................. 4
3 Assembling the stand
3.1 Assembling the stand components ................................... 4
3.2 Assemblingthetabletop ......................................... 5
3.2.1 Assemblingthetabletopinthemachinewiththedirectdrive.................... 5
3.2.2 Assemblingthetabletopwiththeminimotor.............................. 6
3.2.3 Mounting the pressure regulator for the sewing foot to the table top ................ 7
3.3 Settingtheworkingheight......................................... 9
4 Assembling the machine head
4.1 Fitting the machine head ......................................... 10
4.2 Fitting the side guards ........................................... 11
4.3 Adjustment of pedal position ....................................... 12
4.4 Fittingthekneeleverandoilpumppipe ................................ 13
4.5 Fitting the connecting cable, control panel
and sewing diode lamp on the machine head ............................. 14
5 Electrical connection
5.1 Electrical connection to low voltage network ............................. 15
5.2 Sewing light transformer connection to network voltage ....................... 16
5.3. Earthing.................................................... 18
5.4 C onnection of machine head electric equipment to drive....................... 19
6 Basic adjustment the positioning drives
6.1 DACbasic/classicdrive........................................... 21
6.2 DACecodrive................................................ 21
6.3 Efkadrive................................................... 22
7 Pneumatic connection .......................................... 23
8 Lubrication ................................................. 24
9 Sew ing test ................................................. 24
To Next Page
Loading...
