Dyna-Glo DGU505BAE - Page 12

12
DD
ASSEMBLY INSTRUCTIONS
5. Remove the pre-assembled screw from the wood
chip access door handle (E) and install the handle
(E) on the side access door of the smoker
cabinet (A).
6. Attach the heating element assembly (K) to
the smoker cabinet assembly (A) using 2
#10-24 x ½” screws (DD) and 2 #10-24
Nuts (CC).
6
E
A
5
Hardware Used
CC
#10-24 Nut
x 2
DD
#10-24 x ½”
Screw
x 2
A
CC
K
7. Attach the thermostat shield (R) to the smoker
cabinet assembly (A) using 2 10#-24*1/2''
screws (DD) .
7
A
DD
R
Hardware Used
DD
#10-24 x ½”
Screw
x 2