4.3 Battery Pack 4 Replacement Procedures
Satellite C40-G/Pro-C40-G Maintenance Manua l 4-9
4.3 Battery Pack
Removing Battery Pack
Remove battery pack according to the following procedures and Figure 4-9.
CAUTION: When handling the battery packs, use care not to short circuit the
terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up
their casing.
1. Remove Battery Maly.
2. Disconnect Battery cable from CN3 on system board.
3. Remove four M2.0x3.0x4.5 black Phillips head screws securing Battery.
4. Remove Battery.
Figure 4-9Removing battery pack
To Next Page
Loading...
