Dynacord LX 1600 User Manual

MAINS OPERATION & RESULTING POWER AMP TEMPERATURES
The following tables are useful in determining power supply and cabling requirements.
The power drawn from the mains network is converted into acoustic output to feed the connected
loudspeaker systems plus heat. The difference between drawn power and dispensed power is referred
to as leakage power or dissipation (P
d
). The amount of heat resulting from power dissipation might
remain inside of a rack-shelf and needs to be diverted using appropriate measures. The following table
is meant as auxiliary means for calculating temperatures inside of rack-shelf systems/cabinets and the
ventilation efforts necessary.
The column “Pd” lists the leakage power in relation to different operational states. The column “BTU/
hr” shows the dispensed heat amount per hour.
MAINS OPERATION & RESULTING
LX2200
U
mains
[V]
I
mains
[A]
P
mains
[W]
P
out
[W]
Pd
(5)
[W]
BTU/hr
(1)
idle 230 0.8 80 - 80 273
Max. Output Power @ 8Ω
(1)
230 11.0 1780 2 x 600 580 1980
Max. Output Power @ 4Ω
(1)
230 19.5 3240 2 x 1100 1040 3549
1/3 Max. Output Power @ 4Ω
(1)
230 11.3 1740 2 x 366 1008 3439
1/8 Max. Output Power @ 4Ω
(1)
230 4.6 640 2 x 137 366 1249
1/8 Max. Output Power @ 4Ω
(2)
230 6.0 850 2 x 137 576 1965
1/8 Max. Output Power @ 4Ω
(2),(4)
253 6.1 950 2 x 166 618 2109
Normal Mode (-10dB) @ 4Ω
(1)
230 4.2 580 2 x 110 360 1230
Rated Output Power (0dB) @ 4Ω
(1)
230 17.6 2860 2 x 900 1060 3617
Alert (Alarm) Mode (-3dB) @ 4Ω
(1)
230 12.6 1980 2 x 450 1080 3685
Max. Output Power @ 2Ω
(1)
230 30.3 5280 2 x 1600 2080 7100
1/8 Max. Output Power @ 2Ω
(1)
230 7.0 1030 2 x 200 630 2150
1/8 Max. Output Power @ 2Ω
(2)
230 8.4 1250 2 x 200 850 2900
(
1) Sine Modulation (1kHz) (2) Pink-Noise according EN60065 (3) 1BTU = 1055.06J = 1055.06Ws
(4) 10% Mains Over Voltage (5) Pd = Leakage Power
The following factors allow direct proportional calculation of the mains current Imain for different mains
supply voltages:
100V = 2.3; 120V = 1.9; 220V = 1.05; 240V = 0.96
9
LX1600
U
mains
[V]
I
mains
[A]
P
mains
[W]
P
out
[W]
Pd
(5)
[W]
BTU/hr
(1)
idle 230 0.8 80 - 80 273
Max. Output Power @ 8Ω
(1)
230 9.6 1780 2 x 500 450 1535
Max. Output Power @ 4Ω
(1)
230 15.7 3240 2 x 800 910 3105
1/3 Max. Output Power @ 4Ω
(1)
230 9.0 1740 2 x 267 797 2718
1/8 Max. Output Power @ 4Ω
(1)
230 4.2 640 2 x 100 360 1228
1/8 Max. Output Power @ 4Ω
(2)
230 4.5 850 2 x 100 425 1450
1/8 Max. Output Power @ 4Ω
(2),(4)
253 4.8 950 2 x 121 448 1529
Normal Mode (-10dB) @ 4Ω
(1)
230 3.8 580 2 x 80 345 1177
Rated Output Power (0dB) @ 4Ω
(1)
230 14.8 2860 2 x 700 925 3156
Alert (Alarm) Mode (-3dB) @ 4Ω
(1)
230 10.4 1980 2 x 350 885 3020
Max. Output Power @ 2Ω
(1)
230 25.8 5280 2 x 1300 1750 5971
1/8 Max. Output Power @ 2Ω
(1)
230 6.7 1030 2 x 163 630 2150
1/8 Max. Output Power @ 2Ω
(2)
230 6.8 1250 2 x 163 640 2184

Dynacord LX 1600 Specifications

General

Brand	Dynacord
Model	LX 1600
Category	Amplifier
Language	English