Dynamic Rhino User Manual

Rhino to RHINO2 Conversion Guide Page 10
Adapting DS72KA to DS90-ACT
To adapt a DS72KA loom to a DS90-ACT loom,
use the DS90 MTR/PB ADAPT LOOM (part no.,
GLM51981), and the RHINO2 BATT/ACT ADAPT
LOOM (part no., GLM51984).
GLM51981: Fit to RHINO2 motor connector socket
GLM51981: Fit to existing motor loom
connector
GLM51981: Fit to RHINO2 park brake connector
socket
GLM51984: Fit to existing battery / actuator
loom connector
GLM51984: Fit to RHINO2 battery connector
socket
GLM51984: Fit to RHINO2 actuator connector
socket
Warning:
Do not plug the scooter’s battery / actuator connector directly into the DS90-ACT
as this will cause the actuator to be driven.
For more information, see the
RHINO2 Installation Manual,
section 3.4

Dynamic Rhino Specifications

General

Brand	Dynamic
Model	Rhino
Category	Controller
Language	English