11CC102/C/122/C/132/142/C M102EN4
ISUZU
Take great care if the radiator cap must be
opened while the engine is hot.
Risk for burns. Wear gloves and safety
goggles.
Fill with coolant consisting of 50% water and 50%
antifreeze. See the technical specifications in these
instructions and the engine manual.
Change the coolant and flush the system
every other year. Make sure that air has free
passage through the radiator.
EVERY 10 HOURS OF OPERATION (Daily)
Coolant level – Check
filling (Circulation of cooling air)
Fig. 4 Radiator
1. Radiator cap
1
Hydraulic reservoir
– Level check – Filling
1
Fig. 3 Engine compartment
1. Filling hydraulic fluid
Fully open the engine hood, unscrew the filler cap (1)
and top off with fresh oil if necessary. See page 3 for
the correct grade of hydraulic fluid.
Fig. 2 Hydraulic reservoir
1. Oil sight glass
Hydraulic reservoir
– Level check – Filling
1
Open the right door of the engine compartment.
Make sure that the oil level is between the max/min
marks. Top off with hydraulic fluid according to the
lubricant specification if the level is too low.
Place the roller on a level base. The engine
must be switched off and the reserve/par-
king brake knob pushed in for all checking
and adjustments on the roller unless other-
wise specified.
To Next Page
Loading...
Need help?
General
