Dynapac CP2700 - Identification Plates; Machine and Engine Plates Information

Identification plates
16 4812325557EN 2018-02-19
Identification plates
Machine plate.
The machine plate (1) is on the top step, on the left side of the
operator's platform.
It specifies the manufacturer's name, the type of the machine,
the serial number, the service weight, the engine power and the
manufacturing year (machines delivered outside EU do not
present CE marking and in some cases they also do not
present the manufacturing year).
NOTE: State the machine plate's serial number when ordering
spare parts.
PIN (Product Identification Number) at the frame
The PIN - product identification number (1) is punched on the
right side of the right frame. It is the same number of the
machine plate (serial number).
Fig.: Frame
1 – Machine plate
2 – Engine plate
Fig. Frame
1 – PIN