Dynapac CP2700 - Control Panel Instrument Descriptions; Key Ignition, Directional, and Warning Controls; Speed, Sprinkler, and Pressure Adjustments

Instrument/controls - Description and function
20 4812325557EN 2018-02-19
Instrument/controls - Description and function
No.
DESIGNATION
SYMBOL
FUNCTION
1
Ignition key
The electric circuit is off.
All instruments and electric controls are on.
The starter is activated.
2
Forward/reverse lever
-
To start the machine, the lever shall be in the
"neutral" position. Move the lever forward
and step on the throttle to drive forwards;
move the lever back and step on the throttle
to drive backwards.
3
Command keyboard
-
4
Direction lights
It shows that the direction lights are activated
(activation via switch at the steering
column).
5
Central warning lights
Appoints general fault. See the control panel
(22) for the description of the fault.
6
High beam lights
It shows that the high beam lights are on (via
switch at the steering column).
7
"+" increase in the tire pressure
When activated, it increases the tires
pressure.
8
"-" decrease in the tire pressure
When activated, it decreases the tires
pressure.
9
High/low speed
The roller starts always in the high speed
mode. The low speed mode is obtained
when activated.
10
Manual sprinkler
Gives continuous sprinkling of water on the
wheels.
11
Automatic sprinkler
When activated, sprinkling is automatically
turned on/off when the forward/reverse lever
is in the "neutral" position.
12
"+" increase of the sprinkler
interval (timer)
The sprinkling frequency increases each
time the water volume on the wheels is also
increased.