EasyManua.ls Logo

Dynapac CP2700 - Parking and Securing the Roller; Chocking Wheels and Master Switch Operation

Dynapac CP2700
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
52 4812325557EN 2018-02-19
Chocking the wheels
Never leave the roller and let it with the engine
running unless the parking brake is activated.
Make sure the machine is parked in a safe area,
without traffic. Chock the wheels when parking
on slopes.
In extremely cold weather, some components may
freeze. Drain the water tanks and pipings.
Master switch
At the end of the working shift, turn off the battery master switch
(1) and remove the handle.
This will prevent the battery discharging and will also make it
difficult to start and drive the machine if unauthorized people try
to use it. Close and lock the maintenance covers and doors.
1
Fig. - Choking the wheels
1. Chocks
1
Fig. Engine compartment
1. Master switch

Related product manuals