Dynapac CP2700 - Six-Monthly Maintenance Tasks (1000 Hours); 1000 Hour Maintenance Items

Scheduled maintenance and lubrication
2018-02-19 4812325557EN 73
EVERY SIX MONTHS (Every 1,000 hours of operation)
POSITION
IN THE
FIGURE
ACTION
NOTES
-
Check the Diesel engine valve
clearances
Refer to the engine
manual instructions.
-
Check the engine propulsion
system
Refer to the engine
manual instructions.
10
Replace the main and the
secondary air filters
Replace air dryer filter
Machine equipped with
AOR
4
Replace the hydraulic oil filters
17
Replace the cab air filter
20
Lubricate the lower pivot bearing
21
Lubricate the upper pivot bearing
23
Replace the wheel gear oil
23
Check the wheel gear oil level
ANNUALLY (Every 2,000 hours of operation)
POSITION
IN THE
FIGURE
ACTION
NOTES
6
Replace the hydraulic oil
11
Clean the fuel tank
13
Clean the water tank
14
Clean the sprinkler system
-
Check the pilot bearings
9
Replace the coolant
Refer to the engine
manual instructions.
-
Check the air conditioning
When equipped (option)
20
Lubricate the lower pivot bearing
21
Lubricate the upper pivot bearing