EasyManua.ls Logo

Dynapac CP2700 - Every 500 Hours Maintenance - Seat Bearing Lubrication; Lubricating Seat Bearing and Steering Chain

Dynapac CP2700
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance - Every 250 hours
2018-02-19 4812325557EN 87
Replace the Diesel engine oil filter
Never perform any maintenance work under the
machine while the engine is still operating. Always
park the roller on a flat and safe place and chock
the tires.
The oil filter (1) is on the right side of the engine compartment.
Refer to the Engine Instructions Manual to obtain information
about the oil filter replacement.
Check and clean the hydraulic and Diesel engine
water coolers.
1. Make sure the air flow through the coolers is unobstructed.
If the cores are dirty, wash them with flowing water (with the
engine cold) and blow them with compressed air.
When using compressed air, always use protective
goggles.
Whenever possible, clean the cores on the
opposite direction to the fan air flow. Every time
you clean the core, cover the electric and
electronic components.
Check the air conditioning (if equipped)
Check the coolant hoses and connections and make sure there
is no sign of oil. If there is oil, maybe there is a possible leakage
as well.
Fig. - Air conditioning
1. Coolant hoses
2. Condenser element
1
2
Fig. - Coolers
1. Recharge air cooler
2. Water cooler
3. Hydraulic oil cooler
4. Cooler grid
1
2
3
4
Fig. Engine compartment
1. Oil filter
1

Related product manuals