Need help?Do you have a question about the Dynasty Spas excalibur Series and is the answer not in the manual?
General| Brand | Dynasty Spas |
|---|---|
| Model | excalibur Series |
| Category | Controller |
| Language | English |
Guidance on selecting a firm, flat, and level surface for spa placement.
Ensuring deck strength and balcony compliance with codes for spa support.
Specifying required clearance for spa delivery and installation through gates and corners.
Details on required voltage, amperage, and circuit breaker specifications for spa operation.
Specification for 4-wire #8 gauge copper wire for spa electrical connections under 50 ft.
Specification for 4-wire #6 gauge copper wire for spa electrical connections over 50 ft.
Diagram illustrating the recommended GFCI load center wiring for spa electrical connection.
Step-by-step guide to prime the pump system, ensuring air removal before operation.
Instructions for operating the digital controls for Dynasty 3000 and 4000 series spas.
How to turn on and operate pumps, including speeds and timer functions.
Guide on operating the spa light and optional fiber box motor.
Explanation of heater start, temperature setting, and economy mode for energy saving.
How to set the duration for the spa's automatic filter cycles.
Common issues like flashing filter indicators, 3 flashing dots, and flashing water temperature.
Overview of the digital controls for Dynasty 5000 series spas.
How to operate pumps and blower, including speeds and timer functions.
Instructions for operating the spa light and optional fiber box.
How the display shows time/temperature and how to set water temperature.
How to adjust the spa's water temperature and understanding the Set Point indicator.
Common issues like flashing filter cycle icon, displayed water temperature, and flashing display.
Overview of the 7-step process for programming spa functions and settings.
Instructions for setting time, filter start time, duration, and frequency.
Instructions for setting the start time and duration for Economy mode.
How to save programmed settings and return to Normal mode.
How to lock the control pad to prevent unauthorized setting changes.
Explanation of switching to and selecting economy operating modes for energy saving.
Instructions on how to invert the spa control panel display.
Details on the audio system's capabilities, including wattage, security panel, and playback options.
How diverter valves control water output to different jets and seats.
Explanation of air controls (venturies) for regulating air and water mixture in jets.
How the waterfall diverter controls water flow specifically to the spa's waterfall feature.
Diagrams showing the physical location of the skimmer and filter on different spa models.
Specific illustration of the skimmer and filter location for the Baron 3000 model.
Instructions for cleaning and replacing the 100 sqft. filter cartridges.
Specific instructions for filter maintenance for the Baron 3000 (50 sqft.) model.
Overview of the three-step process for maintaining clean spa water: Balance, Filtration, Sanitation.
Instructions on filling the spa, including initial chemical treatments and additives.
Importance of regular water testing and dealer assistance for proper balance.
Explanation of chemical balance in spa water (alkalinity, pH, hardness) and its importance.
Monthly tasks for equipment protection and water care.
Instructions for cleaning filters and maintaining the spa surface.
Procedures for adjusting water balance and sanitizing spa water.
Using products for mineral control, foam control, and aromatic enhancement.
Using skin softener products to moisturize and smooth skin after spa use.
Using algaecide to kill and prevent algae growth in the spa water.
Step-by-step instructions for draining the spa water using a garden hose.
Essential steps for winterizing the spa to prevent freezing damage during cold weather.
Guidelines for cleaning, protecting, and maintaining the spa cover for longevity.
Probable causes and actions for issues with spa heating performance.
Troubleshooting steps for when the spa pump fails to prime or start correctly.
Actions to take if the spa jets are not functioning as expected.
Diagnosing and resolving issues related to reduced water flow in the spa jets.
Identifying potential causes and actions for spa leaks.
Troubleshooting steps when the spa motor or pump fails to operate.
Understanding normal motor heat and addressing overheating issues.
Definitions of key spa components like cabinet, filter, jets, and heater.
Definitions for terms like GFCI Breaker, Gate Valves, and Control Panel.
Definitions for water-related terms like Air Venturi, Bleeder Screw, and Corona Discharge.
Definition of Potential for Hydrogen, measuring water acidity or alkalinity.
Definition of the opening with a gate that removes surface debris from the water.
Details on spa model dimensions, capacity, and weight.
Features and specific models available in the 3000 series.
Features and specific models available in the 4000 series.
Features and specific models available in the 5000 series.
To Next Page
