Set Up / Location
Depending on your personal listening environment and room dimensions, the loudspeakers
may be angled in towards the listening area to focus the sound radiation. This positioning
will typically improve imaging and is especially recommended by Dynaudio. However, you
are free to select the precise position based on your personal listening habits.
A cloth grille is included and can be afxed to the cabinet to help protect the drivers from
dust and any other inuences. The grille is acoustically optimized, but the highest sound
quality levels will be attained without any grille covers in place during listening.
If a front grille is used, it is held on the front of the housing by means of magnets.
Removing and attaching the front grille:
To remove the grille, gently pull the grille at all corners straight away from the front.
To t the grille, line it up exactly in front of the housing with the logo facing upwards and
carefully push the cover onto the loudspeaker.
Loudspeaker toe-in
Grille
To Next Page
Loading...
Need help?
General
