P8
The oor-standing Focus XD loudspeaker features a special base construction, which offers
both an ideal performance and mechanical basis. The spikes screwed into the end of the
feet on the base can be unscrewed and their height adjusted, to adapt to uneven oors.
When the spikes are retracted, the loudspeakers stand on rubber feet. These stabilize
the cabinet on an extremely small contact area, and therefore prevent any wobbling while
offering optimal resonance control.
The best set-up variant depends on the nature of the room and the oor in particular.
Your Dynaudio distributor would be happy to assist you during set-up.
The compact Focus models are designed to offer exceptional performance while taking up
minimal space. Due to adverse effects to the sound quality, compact loudspeakers should
not be placed on the oor. The mini-monitors will realize their optimum performance when
used in conjunction with a stand to position them at the proper height while absorbing any
resonance. Please contact your Dynaudio distributor for more details.
Due to its dimensions, you can also place the loudspeaker on a ledge or shelf or on top
of furniture. To avoid the possibility of any negative inuence on sound quality, make sure
to utilize a stable surface offering a wide enough space in front of the loudspeakers as to
not limit the sound quality and performance.
Floor-standing
loudspeaker set-up
Compact
loudspeaker set-up
Spike on oor-standing Focus XD.
To Next Page
Loading...
Need help?
General
