Dyness B4850 - Installation Procedures; Tools and Safety Gear

Installation-19
B4850
3.0 INSTALLATION
3.1 Tools
WireCutter CrimpingModular
Plier
CableTies ScrewDriver
ElectricScrew
Driver
AdjustableWrench Isolatingnutdrivers Multimeter
Tab.3.1-Toolsneededtoinstallbatterypack
Danger. Useproperlyinsulatedtoolstopreventaccidentalelectricshockorshort
circuits.
Ifinsulatedtoolsarenotavailable,covertheentireexposedmetalsurfacesofthe
availabletools,excepttheirtips,withelectricaltape.
3.2 Safety Gear
Itisrecommendedtowearthefollowingsafetygearwhendealingwiththebattery
pack.
Insulatinggloves Safetygoggles Safetyshoes