Dyness B4850 - Battery Parameter Settings On The Inverter; Register On The Website After Installation

26-Installation
Note: Afterthewholesystemconnection,setthemasterDIPmodeaccordingtothe
invertermodelrstly,thenstartthebattery.
Note: Formoreinformationofmatchinginverterbrands,pleasesubjecttothelatest
document.
Eachpairofpowercable,it’slimitedcontinuouscurrentis120A,soiftheinverter
Max.workcurrentmorethan120A,pleaseaddpowercableaccordingtothe
proportion.
3.7.4 Batteryparametersettingsontheinverter
•
MaxCharging(Bulk)Voltage:53.5V
•
AbsorptionVoltage:53V
•
FloatVoltage:52.5V
•
ShutDown(cutoff)Voltage:47V
•
ShutDown(cutoff)SOC:20%
•
RestartVoltage:49V
•
MaxChargeCurrent:25A*batteryQTY
•
MaxDischargeCurrent:25A*batteryQTY
•
Capacity:1*B4850=50Ah
3.7.5 Registeronthewebsiteafterinstallation
Afterthebatterysysteminstallationiscompletedandtherunningisnormal,you
needtologintotheDYNESSofcialwebsitetoregistertheproductinstallationand
useinformationtomaketheproductwarrantyeffective.
Pleasefollowtheinstructionsonthewebsitetoregister.
dyness-tech.com->Service->Sign.