Dyness B4850 - Safety Information; Symbols and Warnings

6
1.0 SAFETY
B4850isahighvoltageDCsystem,operatedbyskilled/qualiedpersonnelonly.
Readallsafetyinstructionscarefullypriortoanyworkandobservethematalltimes
whenworkingonwiththesystem
Incorrectoperationorworkmaycause:
•
injuryordeathtotheoperatororathirdparty;
•
damagetothesystemhardwareandotherpropertiesbelongingtotheoperatorora
thirdparty.
1.1 Skills of Qualied Personnel
Qualiedpersonnelmusthavethefollowingskills:
•
trainingintheinstallationandcommissioningoftheelectricalsystem,aswellasthe
dealingwithhazards;
•
knowledgeofthismanualandotherrelateddocuments;
•
knowledgeofthelocalregulationsanddirectives.
1.2 Symbols
DANGER
Lethal voltage!
Battery strings will produce DC power and can cause a lethal voltage and an
electric shock.
Only qualied person can perform the wiring of the battery strings.
Warning
Risk of battery system damage or personal injury.
Do not pull out the connectors while the system is working!
De-energize from all multiple power sources and verify that there is no
voltage.
Caution
Risk of battery system failure or life cycle reduces.
Read the product and operation manual before operating the battery system!
Danger! Safety!
Warning electric shock!
Do not place near ammable material
Do not install the system in an outdoor area