What to do if control buttons on Dynex LCD TV do not work?
If the control buttons on your Dynex LCD TV do not work, ensure that the Button Lock option is set to NO. If that doesn't work, unplug the power cord, wait a few seconds, then plug it back in and turn on the TV.
Why aren't the control buttons working on my Dynex DX-32L200A12 LCD TV?
Make sure that the Button Lock option is set to No on your Dynex LCD TV. If that doesn't work, unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
How to fix a Dynex DX-32L200A12 LCD TV remote that's not working?
First, ensure the power cord is correctly connected to both your Dynex LCD TV and the power outlet. Then, check for any obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor. Make sure the batteries are installed correctly or replace them with new ones.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Display Technology | LCD |
| Brightness | 250 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 178° (H) / 178° (V) |
| Speakers | 2 x 8W |
| Power Consumption | 65W |
| Inputs | Composite, Component, RF |
To Next Page
