Why is the picture poor on my Dynex DX-32L200A12?
If you're getting a poor picture on your Dynex LCD TV, make sure that the room is not too bright, as light reflecting off the screen can make the picture difficult to see. Also, if an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor, so turn off one or more devices.
How to stop audio noise on my Dynex LCD TV?
If you are experiencing audio noise with your Dynex LCD TV, other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. Once you have determined which device is causing interference, move it further from the TV to eliminate the interference.
How to fix black bars on my Dynex DX-32L200A12?
To resolve the issue of your Dynex LCD TV picture not filling the screen and having black bars around the picture, change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9).
What to do if my Dynex DX-32L200A12 LCD TV only shows snow?
If your Dynex LCD TV only shows snow (noise) on the screen, try switching to another channel to rule out station issues. Also, make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or a set-top antenna with a built-in amplifier.
Why is the picture quality poor on some channels of my Dynex LCD TV?
If your Dynex LCD TV picture quality is good on some channels but poor on others, the problem may be a weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
Why are there dotted lines on my Dynex DX-32L200A12 LCD TV?
To address dotted lines or stripes on your Dynex LCD TV screen, first ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low, so check the signal strength. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or a set-top antenna with a built-in amplifier. Make sure the video cables are connected securely to the back of your TV, and try a new set of video cables. Also, other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. Once you have determined which device is causing interference, move it further from the TV to eliminate the interference.
How to fix color problems on my Dynex DX-32L200A12 LCD TV?
If your Dynex LCD TV shows no color, a dark picture, or incorrect colors, try switching to another channel first. Then, adjust the color saturation. Make sure the video cables and the antenna or cable TV are correctly and securely connected to the back of your TV. If you're using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or a set-top antenna with a built-in amplifier.
Why is there good picture but no sound on my Dynex DX-32L200A12?
If you're getting good picture but no sound on your Dynex LCD TV, start by increasing the volume and ensuring the sound isn't muted. Unplug any headphones that may be connected. Make sure the correct audio mode is selected and that the audio cables are securely connected to the back of your TV. Also, ensure the antenna or cable TV is connected correctly. If you are using an antenna, the digital channel signal may be low. Finally, try a new set of audio cables to rule out bad cables.
What to do if my Dynex LCD TV has sound but no picture?
If your Dynex LCD TV displays a dark, poor, or no picture (but the screen is lit) while the sound is good, first try switching to another channel to rule out station-specific problems. Ensure the antenna or cable TV is securely connected. Adjust the brightness settings. Verify that the correct picture mode is selected. If you're using an antenna, the digital channel signal might be weak, so check the digital signal strength. If the signal strength is low, adjust the antenna or consider using a highly directional outdoor antenna or a set-top antenna with a built-in amplifier. Also, ensure the video cables are securely connected and try a new set of video cables to eliminate them as the source of the problem.
What to do if my Dynex DX-32L200A12 has no picture and sound?
If your Dynex LCD TV shows no picture and no sound, first, ensure the power cord is properly plugged in. Then, press the power button on the TV or remote. Check if the 'Audio Only' option is off. Verify that the video cables are securely connected. Adjust the contrast and brightness settings. Make sure the correct video input source is selected. Try another channel to rule out station issues. Confirm that the incoming signal is compatible. Ensure the antenna or cable TV is correctly connected. Finally, check the closed caption settings to make sure some TEXT modes are not blocking the screen.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Display Technology | LCD |
| Brightness | 250 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 178° (H) / 178° (V) |
| Speakers | 2 x 8W |
| Power Consumption | 65W |
| Inputs | Composite, Component, RF |
Provides essential safety advice for TV placement, especially concerning children's safety.
Offers instructions and warnings for securely mounting the TV on a wall.
Covers electrical hazards, lightning protection, LCD panel care, and using replacement parts safely.
Lists 18 detailed instructions for safe operation, handling, installation, and electrical safety.
Step-by-step instructions for attaching the TV stand, including screw details and orientation.
Guidance on attaching a wall mount bracket to the TV, referencing manufacturer instructions.
Recommends the best video connection types (HDMI, Component, Composite) for optimal quality and provides cable visuals.
Details connecting a cable/satellite box using HDMI for the best video and audio signal.
Explains menu navigation and how to adjust picture settings like Mode, Contrast, and Brightness.
Details advanced picture settings like Sharpness, Backlight, Noise Reduction, and Color Temperature.
Guides on adjusting sound modes, treble, bass, balance, and audio language.
Steps to set or change the parental control password for accessing restricted content.
Details how to set parental control levels for US and Canadian TV/movie ratings.
Instructions on how to block TV programs that do not have a rating signal.
Instructions for enabling or disabling closed captioning (CC) for TV programs.
Details on choosing different closed captioning modes for analog and digital broadcasts.
Provides guidance on cleaning the TV screen and surfaces, and when to seek professional servicing.
Lists common video and audio problems and their solutions.
Addresses issues like snow/noise, dotted lines, double images, and no sound.
Outlines the one-year limited warranty, coverage, definitions, and how to obtain service.
Lists items not covered by the warranty, exclusions, and contact information for customer service.
To Next Page
