What causes audio noise on my Dynex LCD TV?
If you are experiencing audio noise with your Dynex LCD TV, other devices (such as surround sound receivers, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing the interference, then move it further away from the TV.
Why won't my Dynex LCD TV turn on?
If your Dynex LCD TV is not powering on, ensure the following: * The power cord is correctly connected to the TV and a working power outlet. * Unplug the power cord, wait 60 seconds, then plug it back in and try turning on the TV. * Other devices may be interfering with your TV. Try turning off one device at a time to determine if one of them is causing interference.
What to do if my Dynex DX-40L261A12 LCD TV has no picture and no sound?
If your Dynex LCD TV screen is dark and there's no sound, try the following: * Ensure the power cord is properly plugged in. * Press the power button on the TV or remote. * Check that the video cables are securely connected. * Select the correct video input source. * Try a different channel to rule out station issues. * Confirm the incoming signal is compatible. * Make sure your antenna or cable TV is correctly connected. * Adjust the contrast and brightness settings. * Ensure the Audio Only option is set to Off. * Check the closed caption settings, as some TEXT modes can block the screen.
Why does my Dynex LCD TV picture not fill the screen?
If your Dynex LCD TV picture doesn't fill the screen and you see black bars, it might be due to the aspect ratio. Many digital TV programs and movies are now shown in widescreen (16:9). To resolve this, change the aspect ratio setting on your TV.
What to do if my Dynex LCD TV has no picture and sound?
If your Dynex LCD TV shows no picture and no sound, try the following: * Press the power button on the TV or the remote control. * Ensure the power cord is plugged in securely. * Verify the video cables are securely connected to the back of the TV. * Select the correct video input source. * Adjust the contrast and brightness settings. * Try another channel in case the station is having issues. * Confirm the incoming signal is compatible. * Check that the antenna or cable TV is connected correctly. * Review the closed caption settings, as some TEXT modes can block the screen.
What to do if my Dynex LCD TV has a dark or poor picture but good sound?
If your Dynex LCD TV displays a dark, poor, or no picture (but the screen is lit) while the sound is good, try these solutions: * Try tuning to another channel to rule out station issues. * Ensure the antenna or cable TV is securely connected. * Adjust the brightness and make sure the correct picture mode is selected. * If using an antenna, the digital channel signal may be weak; adjust the antenna or use a high-powered antenna. * Make sure the video cables are securely connected. Also, try using a new set of video cables, as the current ones may be faulty.
Why are there no channels after auto channel search on my Dynex LCD TV?
If your Dynex LCD TV has no channels after auto channel search, reception can vary. Contact your cable or satellite TV provider. Also, ensure the antenna or cable/satellite TV is securely connected to your TV. You can also try replacing the cable between the antenna/cable or cable/satellite box and your TV.
What causes after images on my Dynex LCD TV?
If you are seeing after images on your Dynex LCD TV, avoid displaying a still image (like a logo, game, or computer image) for extended periods, as this can cause permanent burn-in, which is not covered by warranty.
How do I get my Dynex LCD TV picture to fill the whole screen?
If your Dynex LCD TV picture does not fill the screen and there are black bars around the picture, change the aspect ratio. Many digital TV shows and movies are presented in widescreen (16:9).
What causes dotted lines or stripes on my Dynex LCD TV screen?
If your Dynex LCD TV displays dotted lines or stripes, try these solutions: * Ensure that the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low; consider adjusting the antenna or using a higher quality antenna. * Make sure that the video cables are connected securely to the back of your TV. * The video cables you are using may be faulty; try a new set. * Other devices may be causing interference. Try turning off nearby devices to see if the lines disappear. If so, move the interfering device further away from the TV.
General| Screen Size | 40 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1920 x 1080 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Brightness | 300 cd/m² |
| Weight | 28.5 lbs |
| Refresh Rate | 60 Hz |
| Sound Output | 10W x 2 |
| Inputs | Component, Composite |
To Next Page