Why is my Dynex LCD TV remote control not working?
If your Dynex LCD TV remote control isn't working, first, ensure the TV's power cord is plugged in. Then, check for any obstructions between the remote and the TV's remote control sensor, located on the front of the TV. Next, make sure the batteries are correctly installed in the remote. If the problem persists, try replacing the batteries with new ones.
What to do if my Dynex DX-46L150A11 LCD TV has no picture and no sound?
If your Dynex LCD TV has no picture and no sound, ensure the power cord is properly plugged in. Then, press the POWER button on either the TV or the remote control. Verify that you've selected the correct video input source. As a final step, try changing to another channel, as the station itself might be experiencing technical difficulties.
How to fix a Dynex LCD TV with a good picture but no sound?
If your Dynex LCD TV has a good picture but no sound, first, make sure that the sound is not muted. Then, verify that the sound mode is set to either Stereo or Mono.
Why is the picture on my Dynex DX-46L150A11 LCD TV dark, poor, or not showing, but the sound is good?
If you're experiencing a dark, poor, or absent picture on your Dynex LCD TV while the sound is working, try adjusting the brightness settings. Also, ensure that the correct picture mode is selected. Finally, check that the antenna or cable TV is securely and correctly connected.
What to do if my Dynex DX-46L150A11 LCD TV only shows snow?
If your Dynex LCD TV screen displays only snow (noise), first try switching to another channel, as the broadcast station may be experiencing issues. Ensure that your antenna or cable TV connection is both correctly and securely connected. Finally, check the signal strength.
How to remove dotted lines or stripes on Dynex DX-46L150A11 LCD TV screen?
To address dotted lines or stripes appearing on your Dynex LCD TV screen, try adjusting the antenna. Also, move the TV away from potential noise sources like cars, neon signs, or hair dryers.
Why does my Dynex DX-46L150A11 show double images?
If your Dynex LCD TV is showing double images, try using a highly directional outdoor antenna or cable TV.
Are bright or dark spots on my Dynex DX-46L150A11 LCD TV normal?
A few bright or dark spots are normal on an LCD screen and should not affect the operation of your Dynex LCD TV.
General| Screen Size | 46 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1920 x 1080 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Weight | 35.3 lbs |
| Refresh Rate | 60Hz |
| Brightness | 500 cd/m² |
| Viewing Angle | 178°(H) / 178°(V) |
| Speakers | 2 x 10W |
| Audio Output | 10W x 2 |
| Inputs | Component, Composite, USB |
To Next Page