How to fix a Dynex DX-46L260A12 remote that's not working?
If your Dynex LCD TV remote control is not working, ensure the power cord is correctly connected to the TV and a power outlet. Make sure there are no obstructions between the remote and the TV's sensor. Point the remote directly at the sensor. Verify that the batteries are correctly installed or replace them with new ones.
Why is the color off on my Dynex LCD TV?
If your Dynex LCD TV has no color, a dark picture, or incorrect color, try another channel to rule out station issues. Adjust the color saturation. Ensure the video cables are correctly and securely connected to the back of your TV. Check that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low; adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why is the picture dark on my Dynex LCD TV but the sound is fine?
If your Dynex LCD TV has a dark, poor, or no picture but the sound is good, try another channel to rule out station problems. Make sure the antenna or cable TV is connected correctly and securely. Adjust the brightness and ensure the correct picture mode is selected. If using an antenna, the digital channel signal may be low; adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier. Check that the video cables are securely connected and try a new set of video cables in case the current ones are faulty.
Why does my Dynex DX-46L260A12 LCD TV have picture but no sound?
If your Dynex LCD TV has good picture but no sound, first increase the volume and make sure the sound isn't muted. Unplug any headphones. Ensure the correct audio mode is selected and that the audio cables are securely connected to the back of your TV. Also, check the antenna or cable TV connections. If you're using an antenna, the digital channel signal may be low. The audio cables you are using may be bad, try a new set.
What to do if my Dynex DX-46L260A12 LCD TV says 'No signal'?
If your Dynex LCD TV displays a “No signal” error message, press the INPUT button to select the correct input for your device or service. If using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input to view channels from the box.
Why is there no picture or sound on my Dynex DX-46L260A12 LCD TV?
If your Dynex LCD TV shows no picture and no sound, ensure the power cord is plugged in, video cables are securely connected, and the correct video input source is selected. Try pressing the power button on the TV or remote. Adjust the contrast and brightness. Also, try another channel in case the station is experiencing problems. Make sure the incoming signal is compatible. Check the antenna or cable TV connections and verify the closed caption settings, as some TEXT modes can block the screen.
Why does my Dynex LCD TV picture not fill the screen?
If your Dynex LCD TV picture doesn't fill the screen and you see black bars, it might be due to the aspect ratio. Many digital TV programs and movies are now shown in widescreen (16:9). To resolve this, change the aspect ratio setting on your TV.
What to do if my Dynex DX-46L260A12 has no picture and no sound?
If your Dynex LCD TV screen is dark and there's no sound, try the following: * Ensure the power cord is properly plugged in. * Press the power button on the TV or remote. * Check that the video cables are securely connected. * Select the correct video input source. * Try a different channel to rule out station issues. * Confirm the incoming signal is compatible. * Make sure your antenna or cable TV is correctly connected. * Adjust the contrast and brightness settings. * Ensure the Audio Only option is set to Off. * Check the closed caption settings, as some TEXT modes can block the screen.
Why won't my Dynex DX-46L260A12 LCD TV turn on?
If your Dynex LCD TV has no power, ensure the power cord is correctly connected to both the TV and a power outlet. Unplug the power cord, wait 60 seconds, then plug it back in and turn on the TV. Other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. Once you have determined which device is causing interference, move it further from the TV to eliminate the interference.
How do I program my universal remote for my Dynex DX-46L260A12?
To resolve issues programming your existing universal remote control with your Dynex LCD TV, see instructions and a table of common codes. Codes are subject to change. For up to date codes, go to www.Dynexproducts.com. Replace dead batteries with new batteries. Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist.
To Next Page
General