How to fill the screen on Dynex LCD TV?
If your Dynex LCD TV picture does not fill the screen and there are black bars around the picture, change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9).
Why aren't the control buttons working on my Dynex LCD TV?
Make sure that the Button Lock option is set to No on your Dynex LCD TV. If that doesn't work, unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
What to do if control buttons on Dynex LCD TV do not work?
If the control buttons on your Dynex LCD TV do not work, ensure that the Button Lock option is set to NO. If that doesn't work, unplug the power cord, wait a few seconds, then plug it back in and turn on the TV.
What to do if my Dynex DX-46L262A12 LCD TV has no picture and no sound?
First, press the power button on the TV or the remote control. Make sure the power cord is plugged in securely. Check that the correct video input source is selected. Also, ensure the antenna or cable TV is connected correctly and securely. Try another channel to rule out station problems. Adjust the contrast and brightness. Finally, make sure the incoming signal is compatible and check the closed caption settings.
Why is picture quality on my Dynex DX-46L262A12 good on some channels but poor on others?
A poor or weak signal from the broadcaster or cable TV provider may be the reason. If you're connected to cable or satellite TV without a set-top box, consider installing one to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
Why does my Dynex LCD TV have no color?
If your Dynex LCD TV has no color, a dark picture, or incorrect colors, try switching to another channel, as the station might have issues. Adjust the color saturation. Ensure the video cables are correctly and securely connected to the back of the TV, as well as the antenna or cable TV connection. If you're using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why is my Dynex LCD TV screen dark but sound is good?
If your Dynex LCD TV shows a dark, poor, or no picture (but the screen is lit) while the sound is good, try switching to another channel, as the station might be experiencing problems. Make sure that the antenna or cable TV is connected correctly and securely. Adjust the brightness and ensure the correct picture mode is selected. If you're using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, ensure the video cables are connected securely and try a new set of video cables, as the current ones may be faulty.
Why does my Dynex LCD TV only show snow?
If your Dynex LCD TV displays only snow (noise) on the screen, try changing to another channel in case the station is experiencing problems. Make sure that the antenna or cable TV is connected correctly and securely. If you're using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
What to do if there's no sound from one of the speakers on my Dynex DX-46L262A12 LCD TV?
Adjust the audio balance settings on your Dynex LCD TV. Also, make sure that the audio cables are connected correctly and securely to the back of your TV.
Why are there no channels after the auto channel search on my Dynex DX-46L262A12?
Keep in mind that reception can vary by channel depending on the broadcast power level of a given station. Make sure the antenna or cable/satellite TV is connected securely to your Dynex LCD TV. You might also want to try replacing the cable between the antenna/cable or cable/satellite box and your TV.
General| Screen Size | 46 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | LCD |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Contrast Ratio | 5000:1 |
| Brightness | 450 cd/m² |
| Audio Output | 10W x 2 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Built-in Tuner | ATSC/NTSC |
| Inputs | Component, Composite |
To Next Page