Dynisco 1490 1/8 User Manual

From lab to production,
providing a window into the process
-10-
www.dynisco.com
Rev: n/aP/N: n/a ECO: n/a
4. Setup Mode
Note: Conguraon must be completed before adjusng Setup parameters.
First select Setup mode from Select mode (refer to secon 2). Press to scroll through the
parameters (while this key is pressed, and for 1 sec aer, the parameter legend is shown, then the
current value). Press or to change the value. To exit from Setup mode, hold down and
press to return to Select mode.
Note: Parameters displayed depends on how instrument has been congured.

Dynisco 1490 1/8 Specifications

General

Brand	Dynisco
Model	1490 1/8
Category	Touch Panel
Language	English