Dynojet POWER VISION 4 - Viewing the Device Information

9
VIEWING THE DEVICE INFORMATION
Device Information allows you to view the Power
Vision 4 fi rmware version, serial number and address,
and copy the device information if needed, while
Firmware type allows you to toggle between brands of
fi rmware.
Note: Changing the fi rmware type will require you to
use the correct diagnostic cable.
1 Press Tunes and press Device Info.
2 Press Copy device information to save a copy of the
device information to your clipboard.
3 Press the Firmware type brand name to view a list of the
available options.
4 Scroll through the brands and select a brand.
5 Press the X to close and initiate the fi rmware update.
6 Press Yes to confi rm the fi rmware update.
View the
Device Info
Press for
fi rmware type
Copy the device
info
Confi rm
fi rmware change
Available
options
Firmware
type