8 POWER VISION 4
INSTALLATION AND USER GUIDE
LOGGING DATA
The Power Vision 4 allows you to log data and view the
log using Power Core Software.
1 Press Datalog.
2 Press Start to begin logging data.
3 Press Lap to save the current log and start a new log.
4 Press Stop to stop logging.
5 Press the Envelope to share your log.
Email the log to your computer and open the log using
Power Core. Refer to the Power Core Help.
Share your log in
Email and open in
Power Core
Start/Stop Log
Press Lap
to save the
current log
and start a
new log
VIEWING THE DIAGNOSTIC CODES
Diagnostics allows you to read and clear diagnostic
trouble codes (DTCs).
1 Press Diagnostic.
2 Press Read DTCs to read codes.
3 Press Clear DTCs to clear the codes.
4 Press the Envelope to share your log.
If requested by Dynojet Technical Support, Email the
fi le to pv4tech@dynojet.com.
Email the codes
to technical
support
Read DTCs