4 POWER VISION 4
INSTALLATION AND USER GUIDE
GETTING STARTED
1 Download and install the Dynojet Power Vision app from
the Apple App or Google Play Store.
2 Verify Bluetooth and Location are enabled.
Location permission is required for the app to access
the phone’s Bluetooth hardware.
3 Connect the Power Vision to the vehicle diagnostic port.
4 Turn the ignition switch to the ON position and the run
switch to the RUN position, but do not start the vehicle.
5 Open the Dynojet Power Vision app.
6 Log in using your Dynojet account login information.
Don’t have a Dynojet account? Press I don’t have an
account and create one. Enter your information and a
password and press Register.
7 Press Scan.
8 Select the Dynojet PV4.
Don’t have
an account?
Create one!
9 Press the Pencil to edit the vehicle name. Press Update
to save.
Select the PV4
Log in
Enter your
information
to create an
account
Indicates the
vehicle you are
connected to
Edit pencil
Scan for PV4
To Next Page
Loading...
Need help?
General
