Dyson DC26 Service Manual

Fitting notes
Service manual
General notes
Disconnect the machine from the electrical outlet at
all times during repair and test. Failure to do so could
result in electric shock or personal injury.
Some female terminal clips used in DC26 contain a locking
mechanism. The release pip will need to be activated before
separation from the male terminal can occur.
Ensure that safety goggles are worn where this symbol
is shown.
Cable rewind - removal
Recommended tools to repair DC26:
Torx T-8, T-10, T-15 screwdrivers
Large flat bladed screwdriver
Thin flat bladed screwdriver
Long/needle nosed pliers
05
01 Remove the cyclone and bin
assembly from the product.
Wire colours may vary between territories.
Ensure that protective gloves are worn where this symbol
is shown.

Dyson DC26 Specifications

General

Suction power	160 AW
Maximum input power	- W
Annual energy consumption	- kWh
Proper use	Home
Noise level	- dB
Removable filter	Yes
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	HEPA
Dirt separating method	Filtering
Type	Cylinder vacuum
Cordless	No
Cleaning type	Dry
Dust capacity	- L
Product color	Blue, Transparent
Tube material	The material the tube is made of.
Dust container type	Bagless
Cord length	5 m
Dust capacity dry	0.68 L
Vacuum brushes included	Hard floor brush

Weight and Dimensions

Weight	5200 g