batteries have been correctly recharged, then all batteries
should be exchanged for new rechargeable NiCd batteries
or non-rechargeable NiMh batteries.
Following rst-time charging, or if the CD player has not
been used for an extended period, the playback time may
be shorter. In this case the batteries should be fully dis-
charged and fully recharged several times.
8. Conventional audio CDs
8.1. Playback
1 Open the CD compartment by pushing to the right the
“OPEN” slide on the front of the player.
Prior to rst-time use:
Remove the cardboard transport protection from the CD
compartment.
2 Insert the jack plug of the supplied headphones into the
“PHONES” socket on the right-hand side of the MP3-CD player.
3 Place a CD – label side up – on the axle in the middle of the
CD compartment. Press the CD down lightly until it is percept-
ibly engaged.
4 Close the CD compartment by pressing down the cover
until it is perceptibly engaged.
To Next Page
Loading...