next data from the loaded CD is overwritten (once again 40
seconds of playback).
If the player is exposed to a shock during playback, then the
data stored in the read-ahead memory buer is read out
for interference-free playback. This gives the laser scanner
time to re-stabilise and read in new data from the CD. After
the data from the read-ahead memory buer have been col-
lected, new data are transferred to the memory.
Please note!
The ESP system cannot prevent damage to the MP3-CD player
as a result of jolts or vibrations or if the player is dropped!
Ensure that the MP3-CD player is transported or stands as
vibration-free as possible and that it cannot fall down from
its location point.
The MP3 DC player can be irreparably damaged by shocks
and vibrations or if it falls down!
6 The rst track on the audio CD is then played.
The following is then possible …
8.2. Setting the playback volume
Set the required playback volume with “VOLUME +” (for loud-
er) and “VOLUME -” (for softer). The currently set volume is
indicated between “Volume 01” (sound OFF) and “Volume 32”
(maximum volume).
To Next Page
Loading...