The MP3-CD player will then be supplied with power from the
car’s electrical system.
4 Insert the car cassette adapter into the cassette deck of
the car’s radio in such a manner that the side with the connect-
ing cable is pointing towards you.
5 Insert the plug of the connecting cable into the “PHONES”
headphones socket of the MP3-CD player.
6 Set “OFF” with the “CHARGE” slide underneath the MP3-CD
player.
7 Open the CD compartment, insert an audio CD or MP3-CD,
and then close the CD compartment.
8 Switch on the car radio and set the volume to a minimum
level.
9 Switch on the MP3-CD player and set the volume at a
middle level.
10 Start playback of the loaded CD/MP3-CD.
11 Set the required playback volume on the car radio and
PM3-CD player.
13.3.4. After use
After use remove the car cassette adapter from the cassette
deck of the car radio and disconnect the connecting cable from
the “PHONES” headphones socket of the MP3-CD player.
To Next Page
Loading...