E-Collar Technologies PG-300 - BUTTON FUNCTIONS; Boosting Vibration in Combo Mode

PG300/302 Owner’s Manual
BUTTON FUNCTIONS
12
Boosting Vibration in Combo Mode
Momentary Boosting is accomplished by first sending a momentary
vibration pulse “S (Black)” to the dog and then pressing “S (Red)”
button without releasing “S (Black)” button. (PLEASE PRACTICE)
Continuous Boosting is accomplished by first administering continu-
ous vibration “S (Red)” to the dog and then pressing the “S (Black)”
button without releasing the "S (Red)" button.
Tapping Vibration / Tone “T”
Sends Tapping Sensation or Tone to the collar receiver.
(Default setting is tone).
To toggle between tapping sensation and tone press “L” and
“T” buttons simultaneously when the intensity level is “0”.
- Single beep and “A” icon indicates tone.
- Double beeps and “T” icon indicates Tapping Sensation (Vibration).
Light Button "L" (ON/OFF Center Button on Back)
Pressing “L” button will change the night tracking light mode.
OFF -> Flashing -> Solid -> OFF
Great for locating your dog after dark. (PLEASE PRACTICE)
Tone
Tapping Sensation