BUTTON FUNCTIONS
PG300/302 Owner’s Manual
11
Stimulation Button S (Black)
- Sends momentary or continuous vibration to the collar receiver
based on the state of Momentary/Continuous Mode.
Stimulation Button S (Red)
- Sends momentary or continuous boosted vibration.
- If
vibration
level is 10, boosted
vibration
sends [10 + boost level ]
- The default value of the boosted level is 5, it can be adjusted to any
value between 1 and 60. Smaller and more sensitive breeds should
use levels 1 through 20, larger and/or more stubborn breeds may
need a higher boost.
Momentary Vibration
Sends a single pulse of
vibration
at the set level when you press the
vibration button.
Continuous Vibration
Sends vibration for as long as the button is pressed,
timing out after 10 seconds (this is a safety feature designed to
prevent accidental over-vibration of your dog). The stimulation can
be increased or decreased while the button is being pressed.
Tapping Sensation
Vibration specifically designed to distract your dog.
Tone
Flat sound up to 30 second.
To Next Page
Loading...
